Reinforced Concrete Archive
Wall footing design is carried out with some assumptions that should be considered while designing. The first assumption is to consider that soil pressure is distributed linearly throughout. This can only be achieved, when resultant of soil pressure coincides with …
Combined Footing Problem Statement Design a rectangular combined footing to support two columns shown above. The edge column on the left has a section of 16” x 16” and carries dead & live load of 175 kips & 110 kips …
Reinforced beam analysis is carried out to check the nominal moment of the beam. When beam is analyzed than one already know about the beam cross section, steel area and effective depth of beam. In analysis, answers are unique. There …
There are many uncertainties in a reinforced type structures. We assume many things that even not possible in actual.
Concrete is said to be reinforced when steel is used along with concrete in combination. That reinforcement gives concrete strength against its weakness I.e. tensile strength, but there are some drawbacks also of that reinforcement.
Concrete is said to be reinforced when steel is being used along with concrete for support against tensile cracking. Concrete is very weak in tension but very strong in compression. In a beam cross-section, there are two separate areas which …